Please inquire:
E-mail, info@denverglass.com, or call:
Ph. 303 781-0980 / fax. 303 781-9067
Ordering Information

Home Cold Working Warm Glass Hot Glass Accessories/Replacement Parts

Clamshell Style Fusing Ovens




Menu:
Products and Information


Cold Working Equipment

Fusing/Casting Ovens
Top Load Ovens
Clamshell Style
Casting Ovens
Bell Style
Furnaces and Glories

Annealing Ovens

Accessories
Replacement Parts


Operator Help Sheets

Catalog / Pricing info

Clamshell Ovens

The Clam Shell style kiln puts the floor at an ergonomic work height. No more bending over to load your kiln. The lid lifting mechanism is different than our other kilns in that it utilizes gas springs to lift the lid open. Choose one of our sizes below or have us custom design one for your studio. Included is the welded steel stand with adjustable leveling feet and a Bartlett RTC-1000 digital setpoint controller with 6 programs and 32 segments per program.

Now available with roll out tables!
Choose one of our standard sizes or have us custom design one for your studio.

Kilns are available in foreign voltages, please specify requirements when ordering.

KL-CS27 Clam Shell

The KLCS-27 is a good choice for the small studio with limited space. It is capable of producing multiple firings per day when firing painted or small pieces. It will accept a 20" x 20" (51 X 51cm) kiln shelf. Included is the welded steel stand and its equipped with gas springs to facilitate opening the lid. Also comes with adjustable leveling feet and a fully programmable digital setpoint control.

CS27 Glass Firing Kiln
  • KL-CS27 Inside Dimensions:
    21" X 21" X 12" deep (3 cu. ft.)
    53 X 53 X 30cm deep
    220 volt, single phase, 28 amp, 6,160 watts.
    Not available in 3 phase
KL-CS27 Kiln
$3,200.00

Standard crating fee is $250.00.
Price does not include shipping.

CS27 Glass Firing Kiln

KL-CS27RT Clam Shell

This kiln is exactly the same as the KL-CS27 above except for the added convenience of a roll out table. You can roll the table right over to your work bench to load. It has easy guide tracks that will then position the table into docking so that the lid fits perfectly into place every time.

  • KL-CS27RT Inside Dimensions:
    21" X 21" X 12" deep (3 cu. ft.)
    53 X 53 X 30cm deep
    220 volt, single phase, 28 amp, 6,160 watts.
    Not available in 3 phase
KL-CS27RT Kiln
$3,600.00

Standard crating fee is $250.00.
Price does not include shipping.


KL-CS50 Clam Shell

The CS50 clam shell style kiln is a great production oven. Large enough to hold several pieces in one firing. With its ergonomic design for loading and unloading, this feature makes it a great choice for fusing large slabs. Mounted on a tubular steel stand and equipped with gas springs to facilitate opening the lid.

CS50 Glass Firing Kiln
  • KL-CS50 Inside Dimensions:
    42" X 28" X 12" deep (8.75 cu. ft.)
    107 X 71 X 30cm deep
    220 volt, single phase, 42 amp, 9,240 watts.
    Available in 3 phase
KL-CS50 Kiln
$4,700.00

Standard crating fee is $250.00.
Price does not include shipping.

CS50RT Glass Firing Kiln

KL-CS50RT Clam Shell

This kiln is exactly the same as the KL-CS50 above except for the added convenience of a roll out table. You can roll the table right over to your work bench to load and unload. It has easy guide tracks that will then position the table into docking so that the lid fits perfectly into place every time.

  • KL-CS50RT Inside Dimensions:
    42" X 28" X 12" deep (8.75 cu. ft.)
    107 X 71 X 30cm deep
    220 volt, single phase, 42 amp, 9,240 watts.
    Available in 3 phase
KL-CS50RT Kiln
$5,100.00

Standard crating fee is $250.00.
Price does not include shipping.


KL-CS60 Clam Shell

The CS60 clam shell's interior is large enough to fire table tops, window and door lights, or a load of platters and bowls all at once. Mounted on a tubular steel stand and equipped with gas springs to facilitate opening the lid.

CS60 Glass Firing Kiln
  • KL-CS60 Inside Dimensions:
    60" X 30" X 12" deep (12.5 cu. ft.)
    152 X 76 X 30cm deep
    220 volt, single phase, 56 amp, 12,320 watts.
    Available in 3 phase
KL-CS60 Kiln
$6,100.00

Standard crating fee is $250.00.
Price does not include shipping.

CS60RT Glass Firing Kiln

KL-CS60RT Clam Shell

This kiln is the same as the KL-CS60 above except for the added convenience of a roll out table. You can roll the table out and have plenty of room to work around it without having to over-reach with a heavy piece. It has easy guide tracks that will then position the table into docking so that the lid fits perfectly into place every time.

  • KL-CS60RT Inside Dimensions:
    60" X 30" X 12" deep (12.5 cu. ft.)
    152 X 76 X 30cm deep
    220 volt, single phase, 56 amp, 12,320 watts.
    Available in 3 phase
KL-CS60RT Kiln
$6,500.00

Standard crating fee is $250.00.
Price does not include shipping.


KL-CS72 Clam Shell

The CS72 has 18 sq. ft. of floor space! Mounted on a tubular steel stand and equipped with gas springs to open the lid. This kiln is available in both single and 3 phase. NOTE: You MUST have a 100amp circuit available to order this oven in single phase.

CS72 Glass Firing Kiln
  • KL-CS72 Inside Dimensions:
    72" X 36" X 12" deep (18 cu. ft.)
    183 X 91 X 30cm deep
    220volt, 3 phase, 50amp, 19,000watts
    220 volt, single phase, 84 amp, 18,480 watts.
KL-CS72 Kiln
$7,000.00

Standard crating fee is $250.00.
Price does not include shipping.

CS72RT Glass Firing Kiln

KL-CS72RT Clam Shell

This kiln is the same as the KL-CS72 above except for the added convenience of a roll out table. You can roll the table out and have plenty of room to work around it without having to over-reach with a heavy piece. It has easy guide tracks that will then position the table into docking so that the lid fits perfectly into place every time.

  • KL-CS72RT Inside Dimensions:
    72" X 36" X 12" deep (18 cu. ft.)
    183 X 91 X 30cm deep
    220volt, 3 phase, 50amp, 19,000watts
    220 volt, single phase, 84 amp, 18,480 watts.
KL-CS72RT Kiln
$7,700.00

Standard crating fee is $250.00.
Price does not include shipping.


Options

These item are available as options on our kilns

Casters

Casters are included on the roll out table models and are available as an option on the standard clam shell kiln.
The set consists of 2 locking and 2 rolling casters. easy to install. Just remove the leveling feet in the stand and screw in the casters.

  • $70.00

Peep Hole

The lensed peep hole measures 1 1/2" in diameter and can be mounted on the front or end of your kiln.

  • $65.00

The new 4" square viewing window can also be mounted on the front or end of your kiln. The window allows a view of whats happening with your project.

  • $125.00

Venting System

Our automatic venting system can be programmed to turn off or on during any segment of the firing program. Great for removing organic fumes, thermal steam or heat at top of proccess.

  • $400.00

Shelves

Ceramic Fiber Board shelves are available in 1/2" and 1" thicknesses.

Ceramic Fiber Board shelves in 1/2" thicknesses.
  • 20" X 20" for the KL-27---$65.00
  • 41" X 27" for the KL-50---$95.00
  • 29" X 29" for the KL-60---$85.00 (requires two shelves)
  • 29" X 29" for the KL-CS60---$85.00 (requires two shelves)
  • 35" X 35" for the KL-CS72---$95.00 (requires two shelves)
Ceramic Fiber Board shelves in 1" thicknesses.
  • 20" X 20" for the KL-27---$110.00
  • 41" X 27" for the KL-50---$174.00
  • 29" X 29" for the KL-60---$150.00 (requires two shelves)
  • 29" X 29" for the KL-CS60---$150.00 (requires two shelves)
  • 35" X 35" for the KL-CS72---$174.00 (requires two shelves)
Mulite Clay Shelf for the KL-27 Kiln
  • 20" X 20" X 5/8"---$82.00 (Includes four 1" posts).




Please inquire:
E-mail, info@denverglass.com, or call:
Ph. 303 781-0980 / fax. 303 781-9067

Home  Contact info  Catalog requests  Site Map Ordering Information

This site is owned and operated by Denver Glass Machinery
© 2012